Home > Blog
Blog

  • HDPE Geocell
    12-23-2022

    Geocell is a three-dimensional mesh cell structure formed by reinforced HDPE sheet material through high-strength welding. Generally, it is made by ultrasonic needle welding. Due to engineering needs, some holes are punched on the diaphragm. ...

  • HDPE geomembrane is defined as a very low permeability coating, membrane or barrier used with any type of related material applied to geotechnical engineering to control fluid migration in any man-made project, structure or system.   ...

  • Geosynthetic clay liner (GCL), bentonite Geosynthetic clay liner (GCL) is a new type of geosynthetics. It is made of graded natural sodium bentonite particles and corresponding admixtures. After acupuncture process and equipment, the bentonite...

  • Geomembranes can be divided into three categories: ordinary geomembranes (single membrane), composite geomembranes, and reinforced geomembranes. (1) Ordinary geomembrane: only a single-layer membrane material. It is made of polymer, elastic...

  • Introduction of non-woven geotextiles and woven geotextiles 1. Non-woven geotextile is a multi-purpose fabric with an appearance similar to felt. Important functions are filtration and separation. Staple fibers or continuous filaments are b...

  • 1. High strength. The yield tensile strength can reach 18MPa, the fracture tensile strength can reach 35MPa, the peel strength is 31kN/m, and the shear strength is 33kN/m; the ductility is good. The yield elongation rate is 13% to 16%, and the fract...

  • All140 Articles Current3/24Page